M&H IRT35.70
INFRARED TOOL SETTER
OPERATING INSTRUCTIONS
NCT Ipari Elektronikai Zrt.
4 / 19
26 May 2023
H-1148 Budapest, Fogarasi út 7.
Phone: +36 1 467 6300
www.nct.hu
1.1.4
Validity
This document is valid for the hardware available at the creation date of the manual itself.
Technical changes by the manufacturer are reserved.
The latest version of this manual can be downloaded under
in the Downloads section.
1.2
Purpose
The Tool Setter IRT37.50 is used for determination of tool geometries like tool length and
tool radius inside the machine. Moreover it measures single cutters and detects tool breakage.
Therefore the measurements can be performed statically or dynamically as well.
1.3
System Components
The components of the system are illustrated in the following figure.
Figure 1 System Components
1.4
Technical Data
Probing Directions
±X; ±Y; -Z
Maximum Stylus Overtravel
XY=±12.5°; Z=-5 mm
Trigger Force
Z=8 N /XY=2 N
Smallest Tool
0.5 mm
Power Supply
1x Battery (3.6 V / ½AA)
Standby: 18 months
Power Supply (alternative)
1x Batterie (3 V / CR2)
Standby: 12 months
Weight (without base plate)
kb. 750 g
