NCR RealScan 7837-3000, User Manual

Page: 103 / 183

Chapter 6: Symbologies 6-15
Code 128 Message Length
Scan the bar codes below to change the message length. Refer to
Message Length on page 6 ‐ 2 for additional information. Minimum and
Maximum lengths = 0 ‐ 80. Minimum Default = 0, Maximum Default =
80.
Maximum Message Length
Code 128 Code Page
Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be
because the bar code being scanned was created using a code page that
is different from the one the host program is expecting. If this is the case,
scan the bar code below, select the code page with which the bar
were created from the chart, Code Page Mapping of Printed Bar Codes
n page A ‐ 4, and scan the value and the SAVE bar code from the
rogramming Chart inside the back cover of this manual. The data
haracters should then appear properly.
codes
o
P
c
Code 128 Function Code Transmit
By default, Code 128 function codes are not transmitted with Code 128
bar code data. However, if you wish to transmit Code 128 function
codes with the bar code data, scan t bar code,
below.
he Function Codes On
6 - 17