NCR RealScan 7837-3000, User Manual

Page: 83 / 183

Chapter 5: Data Formatting 5-5
Data Format Editor Commands
Send Commands
F1 Send all characters followed by “xx” key or function code, starting
from current cursor position. Syntax = F1xx (xx stands for the
hexadecimal value for an ASCII code, see ASCII Conversion Chart
(Code Page 1252) in Appendix A.)
F2 Send “nn” characters followed by “xx” key or function code,
starting from current cursor position. Syntax = F2nnxx (nn stands
for the numeric value (00 ‐ 99) for the number of characters and xx
stands for the hexadecimal value for an ASCII code. See ASCII
Conversion Chart (Code Page 1252) in Appendix A.)
F3 Send up to but not including “ss” character (Search and Send)
starting from current cursor position, leaving cursor pointing to “ss”
character followed by “xx” key or function code. Syntax = F3ssxx (ss
and xx both stand for the hexadecimal values for ASCII codes, see
ASCII Conversion Chart (Code Page 1252) in Appendix A.)
F4 Send “xx” character “nn” times (Insert) leaving cursor in current
cursor position. Syntax = F4xxnn (xx stands for the hexadecimal
value for an ASCII code, see A SCII Conversion Chart (Code Page
1252) in Appendix A, and nn is the numeric value (00 ‐ 99) for the
number of times it should be sent.)
E9 Send all but the last “nn” characters, starting from the current
cursor position. Syntax = E9nn (nn is the numeric value (00 ‐ 99) for
the number of characters that are not sent at the end of the message.)
Move Commands
F5 Move the cursor ahead “nn” characters from current cursor
position. Syntax = F5nn (nn stands for the numeric value (00 ‐ 99) for
the number of characters the cursor should be moved ahead.)