Getting Started
How To Open And Close The Standard Security Enclosure
2-10
NCR
SHUVRQD
V
ATM Operator Manual
Factory Setting
2
If the combination lock is set at the original factory
setting of 50, you unlock it as follows, dialling on the
opening index:
1
If a keylock is fitted to the combination lock, insert
the key into the lock and turn it clockwise.
2
Turn the dial a minimum of four turns
counterclockwise and stop on 50.
3
Turn the dial slowly clockwise until the bolt retracts.
The lock is now open. Use the handle on the door to
retract the door bolt and open the door.
Customer Setting Combination
2
If the combination has been set at a three-number
combination, for example 36-82-44, unlock it as follows:
1
If a keylock is fitted to the combination lock, insert
the key into the lock and turn it clockwise.
2
Turn the dial counterclockwise, passing the first
number (36) three times, stop on the first number (36)
the FOURTH time.
3
Turn the dial clockwise, passing the second number
(82) twice, and stop on the second number (82) the
THIRD time.
4
Turn the dial counterclockwise, passing the third
number (44) once, and stop on the third number (44)
the SECOND time.
Book.bk Page 10 Thursday, March 11, 1999 2:24 PM
