NCR Orderman Base Station4 User Manual V01.10
Operation
Orderman GmbH (Part of NCR Corporation) 18
4
Operation
4.1
Operation with power supply unit
Note:
Comply with the operating temperature range (ambient temperature) for
the power supply unit. Use only the original power supply unit for the NCR
Orderman Base Station4.
4.2
Operation with Power over Ethernet (network-powered)
There are two options for using Power over Ethernet:
Direct supply via PoE network switch
Use of a PoE injector (available as Orderman accessory)
Note:
If it is planned to use Power over Ethernet (PoE), use the RJ45 UTP
adapter that is included in the OMB4 package (Fig. 17) to connect the
NCR Orderman Base Station4 to the Network.
Fig. 17: RJ45 UTP adapter part of the OMB4 package
4.3
Status indicator
The OMB4's light ring displays information about the following operating states:
Color
Status
Blue
Startup, booting up
Green
Connection to host system is active
Pink
Not connected to network
Yellow
Warning
(The installation should be checked with System Center 2):
A OMB4 is not available. Can have the following causes:
o
Grouping is incorrect
o
Connection to the OMB4 is interrupted (in this
case at least all other OMB4s will show a yellow
status indicator as well)
The OMB4 has detected a radio based disturbance on its
radio channel.
Red
Error
Does not light up
No or very low power supply
