Memory Upgrade
7
Removing the EBox cover
Caution:
Properly hold and support the EBox cover while loosening or tightening the
screws that secure the EBox cover to the EBox chassis.
! Important:
Though the cables do not need to be disconnected while removing the
EBox cover and installing the Memory Module, it is recommended to take a picture of
the cable connections to the EBox and of the cable routing. This action may be helpful in
case any of the cables get disconnected during the memory upgrade procedures.
1. Loosen the two screws at the top of the EBox cover.
2. Slide the EBox cover upwards and remove it from the EBox chassis. The memory
module sockets can now be accessed.
