26
Document Number
DCV-00545
Date Released
Jul. 2020
Revision Number/Security level
R01 S2
Retrofit OPTIC 5 Touch+ InvencoLink Wayne Ovation (US & Canada)
Installation Guide
Removal of QVGA Panel (Setup 1
)
1) Remove and discard the four
#6 ¼” screws (may be fewer after removal of ground
screws) that fasten the QCAT board to the metal QVGA retainer bracket and remove the
board from the retainer assembly. The "Caution High Voltage" shield may need to be
removed to access one of the screws. The QCAT board can be discarded. It will not be
re-installed. (Fig 8a,b)
Note
: the QCAT board may have plastic standoffs in addition to or in substitute of screws. If
so, those standoffs should also be discarded.
Fig 8a
–
Identifying the QVGA Bracket and QCAT Board
Fig 8
–
location of QCAT Board screws and “High Voltage” Shield
QCAT Board Screws
Shield
QVGA Retainer
Bracket
QCAT
Board