NCR 6002-K007-V001, Installation Instructions Manual

Page: 23 / 36

Printer Reuse Kit 9
3. Install the gasket (497-0514265) over the side of the hinge making sure the gasket
stays within the channel in the dispenser door. Orient the gasket so the thick side of
the gasket covers the hinge.
Continue the Dispenser Retrofit Installation. Follow the OPTIC 12 Ovation 2 Retrofit Kit
installation instructions (497-0517176), UL Listed by Report Retrofit kit part number
6002-0006-8801.
Install the Printer to the Dispenser Door
1. Install the Printer to the Reuse Kit Chassis.
a. Obtain the Reuse Kit Chassis (497-0515042). Extend the slide to gain better access
to the Printer mounting location. Install the previously retained bottom stud
screw to the Reuse Chassis using a 3mm Hex Key.