background image

EB1 Specifications:

Dimensions: .............................. 3.75 x 1.25 inches
Max. input current:..................... 10 Amps
Max. DCC voltage:..................... 22 Volts
Short circuit response:............... 16mS to 512mS
Over current trip points:..............2.5 Amp +/- 75mA

3.50 Amp +/- 90mA
4.00 Amp +/- 120mA
5.00 Amp +/- 100mA
6.00 Amp +/- 150mA
7.00 Amp +/- 150mA
7.50 Amp +/- 100mA
8.00 Amp +/- 200mA

Ext. LED maximum current........17mA (300 Ohms in series with 5 volts)
Accessory address range...........1-2044 (2041-2044 are NMRA broadcast addresses)

Device Warranty
This device is fully factory tested and warranted against manufacturing defects for a period of 1 year.  As the
circumstances under which it is installed can not be controlled, failure of the device due to installation problems can
not be warranted.   This includes misuse, miswiring, or operation under loads beyond the design range of the
device.  For warranty or non-warranty replacement send the device (and any payment, if required) to:

NCE Warranty Center
82 Main Street 
Webster, New York  14580

The terms Silent Running, Powerhouse Pro, Power Pro, ProCab, Power Cab, the NCE logo with “Power of DCC” slogan and and the
distinctive shape of the ProCab with thumbwheel and LCD are trademarks of NCE Corporation.  Digitrax is a trademark of Digitrax Inc.

**Last revised:  23 April 2012

Page 6

EB1

05240225

05240225

Summary of Contents for EB1v1







Reviews: