8
OPERATION GUIDE
1.
ON / OFF
ON: The unit will be Auto Power On after connecting with power supply. For the first-time operation of
the unit, the air speed is at 03.
OFF: Press ON / OFF button during operation to turn unit off.
2.
OPERATION INSTRUCTION
2.1.
AIR SPEED ADJUST BUTTON
Press the buttons of Air Speed Reduce
/
Increase
to adjust air speed. Air speeds are as
follows: 01 - 10 and SS.
2.2.
WIND UP & DOWN BUTTON
Press the button
to lock the wind direction and stop the movement of air grid if requiring to fix the
swing-flap angle. Press the Wind Up & Down Button again to resume the swing-flap mode.
2.3.
TIMING BUTTON
Press the Timing Button
,
where pressing once to set time with 1 hour
, twice with 2
hours
and so on to 9 hours
as the longest timing. One more press after the timing of 9
hours to set with 0 hour
for exiting the timing function.
2.4.
ECO MODE BUTTON
It is recommended to select Eco Mode
during sleep time, where “Eo” shows at display screen.
When entering into Eco Mode, the air speed will automatically adjust to 03, deaden speed sound and
dim all indicators.
Exit: Only need to press Eco Mode button for exiting Eco Mode and turning back to Air Speed Mode.
2.5.
SS MODE
Press the Air Speed Increase Button
to enter into SS Mode
when the air speed is at 10. It
is recommended to select this mode to treat a seriously contaminated environment at a short time.
Press the Air Speed Reduce Button
to turn back to Air Speed Mode, followed by the default air
speed at 10.
2.6.
FILTER INSTALLATION SUGGESTION
When HEPA Filter or NCCO Reactor is not correctly installed or has not been installed, “Beep Beep”
sound is heard from unit and “EE” displays at control panel. Unit does not operate.
Correct Operation: Disconnect power supply, open unit cover to re-install Filter or Reactor. “Beep Beep”
sound will stop and unit will resume to operate after correct installation.
