
15
Machine Data
STEERING
Steering of the dumper is by an ‘Orbital’ hydrostatic steering unit, that articulates the centre
of the machine using a hydraulic cylinder which in turn gives a steering motion.
BRAKES
Braking is provided by Hydrostatic retardation. A park brake automatically engages when
the accelerator pedal is released. There is also the Park Brake Switch, this is used to stop the
vehicle in the event of an emergency.
ENGINE
This machine has a three cylinder diesel engine that transmits power to the wheels via a
hydrostatic pump and wheel motors. The dumper is equipped with electric start from a key
on the steering column. A battery isolator is provided under the bonnet in the engine
compartment.
VEHICLE IDENTIFICATION PLATE - VIN
The VIN plate (A) is located on the left hand side of the rear chassis beside the steps. The
number is unique to each machine and must be quoted when in contact with the
manufacturer. From the VIN the manufacturer can call up detail relating to each individual
machine i.e. Date sold, customer, serial No., special build features etc.
(A)