NC-17 iPhone Bike Mount, Manual

Page: 49 / 66

47
100 percent control over your bike during us-
age, we advise against using the NC-17 Bike
Mount.
Position on the handlebar
The iPhone holder is suitable for different
handlebar diameters. But it is designed for
a 31.8mm diameter in general. You can as-
semble it to other clamp diameters by using the
supplied adapters (9).
Note: NC-17 Bike Mount has not been tested
suf fi ciently on motorcycle/ mokick or moped.
Please refer to the terms of guarantee.
Before you install the holder, check the handle-
bar for its accuracy to the size needed. The han-
dle bar may not deviate more than +/-0,10mm
from basic size. This may result in functioning
problems of the Bike Mount. If necessary ask
your handlebar manufacturer whether an as-
sembly of the NC-17 iPhone is possible or not.
Further checks are recommended in particular
for carbon handlebars.