NC-17 iPhone Bike Mount, Manual

Page: 47 / 66

45
protection fi lm for hardcore use. After inserting
the iPhone please press the outer frame of your
iPhone gently down to create contact between
iPhone and suction cap. The NC-17 Bike Mount
is the
fi rst iPhone holder which is constructed
completely from aluminum.
We are always striving to improve the func-
tionality of our product, please don’t hesitate to
contact NC-17 with your valuable feedback and
remarks. Thank you!
Warning notices I
Note: For questions concerning the iPhone,
please follow the instructions and manual of
the manufacturer.
Note: Remember to remove your iPhone when
leaving your bike. Our tests have shown that
about 80 percent of users forget to remove the
iPhone, especially at the beginning phase of
usage. Please keep that in mind. Always check
the holder if you cannot locate your iPhone.
Note: Severe weather conditions may cause
damage to the security of the holder. Please
check if the iPhone is fastened before you ride,
by trying to push it
fi rmly out of the side of the
holder, it must not move.