Accessories
Burning Zone Monitoring (A-CS-BZ-EN-KIT-485)
43
6
6.5 Burning Zone Monitoring (A-CS-BZ-EN-KIT-485)
With Burning Zone Monitoring a two-color point sensor (Endurance ratio pyrometer) can be installed looking into
the burn zone of the kiln to monitor the temperatures in this very important area. The two-color unit will essentially
“see” through the smoke and other by-products of combustion and the temperature reading will be displayed on
the main screen.
For an overview of a CS400 system with Burning Zone Monitoring, see section 8.2
6.5.1 Technical Data
Temperature range
600 to 1800°C (1112 to 3372°F)
Spectral response
1 µm nominal
Accuracy
± (0.5% T
measured
+ 2°C), T
measured
in °C
Optical resolution
100 : 1 (95% energy)
Protection rate (sensor)
IP65 (NEMA-4)
Ambient temperature
without cooling
0 to 65°C (32 to 149°F)
with ThermoJacket
up to 315°C (600°F)
Cable length
15 m (49 ft.)
Digital interface
RS485
For other technical data see Endurance operator’s manual and the ThermoJacket operators manual.
6.5.2 Delivery
The scope of delivery for the Burning Zone Monitoring accessory:
Endurance ratio pyrometer, type: E1RL
Endurance connection box
High temperature cable, 15 m (49.2 ft)
ThermoJacket for Endurance pyrometer, with adjustable mounting bracket
Blast gate assembly with quartz window
Sighting tube, 30 cm (11.8 in) length, stainless steel
Adjustable pipe adapter assembly
Air flow regulator
Air pressure regulator
