CS400
System
Hardware Manual, Rev. 1.0, Sep 2021
40
6.3.6 Wiring
Figure 6-6: Wiring of TSM
For the detailed wiring of the TSM see section 8.7
For recommended cables see section 3.5
Note
The position indicator for the kiln (master) must be wired to the <kiln trigger> labeled input on the terminal line of
the TSM remote control box! All subsequent TSM position indicators must be wired to the inputs <Ring 1>,
<Ring 2> and so.
Junction
Box
Position
Indicator
(TSM)
Position
Indicator
(Kiln)
Position
Indicator
(TSM)
Position
Indicator
(TSM)
Junction
Box
Junction
Box
Junction
Box