4
© 2015 nbn co ltd | ABN 86 136 533 741
Getting started
Once your
nbn
™
connection box has been installed and your service provider has
advised your services are now active, just follow the simple steps below to begin
enjoying your new service over the
nbn
™
network.
1
Connect any compatible equipment to the
nbn
™
connection box. Use the port
designated for that service
C
as directed by your phone and internet service
providers. Further information on the ports can be found on the next page.
To remove the cover to access the ports, refer to the diagram below.
2
If you have arranged a phone service to be supplied through the voice (UNI-V)
port then your phone should be connected to the designated active voice
(UNI-V) port on the
nbn
™
connection box
D
(or to your existing phone sockets if
a registered cabler has wired them up to your
nbn
™
connection box). Your phone
and internet service providers will also let you know which connection to use.
Press the two clips
A
to release the cover.
Lift the cover at an angle to remove
B
.
Things to note:
•
If you have the Power Supply with Battery Backup, the ‘system status’ light
on it should glow green.
•
The
nbn
™
connection box ‘power’ and ‘optical’ lights will both glow green.
For more information on indicator lights, see pages 14 and 25.
Removing the
nbn
™
connection box cover
Property of NBNCo - Do not Remove
Contact your service provider for
assistance with this equipment
Property of
nbn
™
- Do not Remove
nbn
™
connection box
(with cover removed)
D
C
Property of NBNCo - Do not Remove
Contact your service provider for
assistance with this equipment
Property of NBNCo - Do not Remove
B
B
A
A
