21
4
Installation and Connections
2
Remove the ⑤ Handle and ⑥
Digital position indicator from the
⑦ Rotating shaft.
3
With the unit mounted to the
mounting plate, pass the rotating
shaft through the ⑧ Output shaft.
Insert the ⑨ Positioning pin into the ⑩
Positioning pin hole.
Be sure to maintain the amount
of protrusion of the rotating shaft
mounted to the unit output shaft at
39 mm (1.535 in.) or more.
4
Secure it in place with the included
⑪ Hex socket set screw (M5x6).
(Recommended tightening torque: 2.8
N m (24.7 lbf in.))
⑤ Handle
⑦ Rotating shaft
⑥ Digital position
indicator
⑨ Positioning pin
⑩ Positioning pin hole for
digital position indicator
⑧ Output shaft
mi
n.3
9
⑪ Hex socket set screw
