21
4 Installation and Connection
■ Max. Allowable Load
Make adjustments such that no excessive load is applied to the
output shaft.
・
Do not hold the cables or output shaft during transportation.
This may result
in a fault.
・
Do not subject the output shaft to strong impacts.
This may result in a fault.
・
Adjust the alignment between the output shaft and the partner device
accurately.
Not doing so may result in a fault.
・
Do not apply excessive radial or thrust loads to the output shaft as this may
damage the bearing.
Allowable Load:
Radial Load: 19.6 N
Thrust Load: 19.6 N
10mm
Thrust Load
Radial Load
Caution
