Compact-M2
5. RECEIVER
R-18,
R-CAN,
Compact-M,
Compact-M2,
Compact-V
PNN-BUS-3
Mounting possibility of the receiver
R-18, R-CAN,Compact-M.
Mounting possibility of the receiver
Compact-V.
.
WRONG
Mounting on a tower slewing crane.
Top slewing crane: Mount the antenna with
extension cable horizontally.
RIGHT
The receiver is connected to the unit to be controlled with the multi-pin connecting
cable supplied. Please observe the instructions issued by the manufacturer of the unit
to be controlled!
We recommend urgently to realize this connection via a cen-
tral, well accessible, multi-pin plug connector (for example HTS-plug connec-
tor series HE/HB/HN/HA or comparable ones of other manufacturers) to
make possible a quick and clear fault diagnosis in the service case and to
take off the receiver without an expenditure of assembly.
The power supply of the receiver is generally effected by the connecting cable.
%
In general, an earth lead is required in case the units to be controlled
have not previously been operated by radio control. Failing this, the
receiver electronic circuit will not receive any power supply. Ensure that
the operating voltage of the receiver complies with the electrical specifi-
cations of the unit to be controlled. The applicable operating voltage is
specified in the supplement.
%
Never expose the receiver to a high pressure cleaning jet. This applies to
the transmitter also.
%
The receiver should always be fixed vertically at the outside panel of the
switching cabinet. (The antenna should always reach over the top of the
panel.)
%
You have to make sure that the antenna is not shielded by metal parts
totally or partly.
%
Mounting the receiver in a cabine or in a switching cabinet the antenna
should be layed with an extension cable to the outside and be attached with
the fastening strapping as horizontally as possible with distance to the
shielding metal parts.
%
In general the antenna should always be mounted in such a way so that the
antenna is still visible with each change of position of the transmitter.
WRONG
RIGHT
Compact-M
R-18
R-CAN
Compact-V
Mounting possibility of the receiver
Compact-M2.
PNN-BUS-3
Mounting possibility of the
PNN-BUS-3.
