Changing the Joysticks:
Unscrew and remove the 4 screws from
the joystick
(witch a Torx T10 screwdriver) (1) and move out the joystick.
Insert the new joystick. Attend the orientation from the connectors
(2).
Fix the joystick with the 4 screws.
After the changing, start the joystick teachmode.
1
2
Joystick teach mode activation EMERGENCY STOP switch:
•
Before starting the joystick teach mode activation, please switch off
1. Push the “Frequency change” button and hold it.
2. Release the “Stop” button.
3. After a while “Jt” should be shown on the display. Now release the “Frequency change” button.
4. Please deflect all joysticks as much
as possible in the same directions as shown.
5. Push the “On/Horn” button..
6. Release the “On/Horn” button.
• Troubleshooting:
If “Jt” couldn't be shown on the display please switch off the transmitter and repeat the teach mode activation procedure.
2
3
1
2
4
1
5
3
3
2
3
1
2
4
1
5
3
6
Joystick teach mode activation with Piezo:
•
Before starting the joystick teach mode activation, please switch off the transmitter!!!
1. Push the
“Frequency change”
button and hold it.
2. Push the
PIEZO
and the
ON/HORN
buttons
3. After a while
“Jt”
should be shown on the display. Now release the
button
“Frequency change”
.
4. Please deflect all joysticks as much as possible in the same directions as shown.
5. Press the
ON/HORN
button. Attention! Now the transmitter is on the working mode!
A red dot flashes on the display during operation.
• Troubleshooting:
If
“Jt”
couldn't be shown on the display please switch off the transmitter and repeat the teach mode activation procedure.
