7
Rope
ASSEMBLY
Step 6
ANCHOR KIT NOT INCLUDED
WITH THIS CANOPY
This canopy is designed for use as a temporary structure. After assembly, the canopy MUST BE securely
chored to the ground to prevent
damage from winds.
Tie anchor cable or rope around the connector at the top of each leg of the canopy.
Securely tie the other end of the cable or rope through the eye of the anchor and pull tight.
Now, continue to screw each anchor into the ground until the eye of the anchor is flush with the ground. This
will secure the anchor
NOTE: You should check and tighten the rope frequently to ensure maximum stability of your canopy
and to protect against
wind damage.
●
●
●
●
Measure out at least 36in from each leg. Screw each anchor into the ground leaving 2in between the ground
and the eye of each anchor.
We strongly recommend that your unit be anchored 36in from each leg although
this may not be possible in all cases.
DO install anchors as close to 36in away from legs as possible.
●
rope even tighter.