3.2.4. Lift stop/s configuration (BVA 2
relays)
1. Click on the lift stop to configure and choose the kind of button of the lift stop. There are three
possible choices:
•
Double
: For buttons with up and down touch
•
Simple
: A single button for both purposes
•
Without device
: For installations where it is not desired to install a BVA device
Configure the relays as they are going to be connected later at the installation.
Pressing on
Check the connections
, it is possible to observe an example of the connection
of the buttons and relays.
Nayar Systems
BVA - 1_en
Page 25 of 29
