4.3 Networking mode
After entering the menu, select the “networking mode” setting menu (Figure 1
below), press to enter the networking mode selection page (Figure 2 below).
Press left and right to select the fixed channel or roaming switch mode. After the
modification completed, press the return key to return to the superior menu.
Fixed channel mode, using the currently set channel, under the channel there is
repeater, to which the handheld is automatically connected. If no repeater under the
channel, it will automatically change into a straight-through mode.
Roaming switch mode is set when the handheld needs to move among multiple
repeaters, to realize the automatic connection to different repeaters. If there is no
connection to the repeater in the roaming switching mode, the handheld will
constantly search for the repeater, accompanied by prompts, and do not stop the
search until finding one repeater.
Handheld should set the list of roaming channels through the configuration
software. For example, there are three repeaters, and the corresponding channels
are channels 60, 85 and 110, and the handheld roaming list is set up for the
corresponding channels 60, 85 and 110.
4.2 Backlight time
After entering the menu, select the “backlight time” menu (Figure 1 below), press
to and then enter the backlight time modification page (Figure 2 below). Press
left and right for backlight time modification, and press the return key to return to
the superior menu after the modification is completed.
Focus on R&D Stable and reliable
Figure 1
Figure 2
Networking mode
Fixed channel
return
Networking mode
8