Focus on R&D Stable and reliable
7.1 Open the software
After the installation is complete, run the PniHtCfg.exe file. After opening the
software, the following figure is shown. The setting interface is all gray and cannot
be edited before selecting and opening the port.
After the setting software is opened, select the corresponding serial port number,
and then click to open the port, the software interface becomes editable condition.
◆
Turn on the handheld at this time (if it is already turned on, simply turn it off,
and then turn it on again). After the handheld is turned on, "connection successful"
appears in the software information bar, indicating that the connection is successful.
◆
After the handset is successfully connected, it will automatically obtain the
parameter information currently set. Modify the parameters according to the needs.
◆
After that, click “SET” to complete the setting operation.
7.2 Fixed channel settings
The fixed channel parameter corresponds to the channel setting of the handheld
machine. Handheld or repeater under the same channel can communicate with each
other.
7. Software use
Base
Import
Link
Open
Refresh
Setting
Channel
0
0
Password
Networking mode
Roam List
The password is an integer ranging from 1 to 999999999.
CH1:
CH2:
CH3:
CH4:
CH5:
CH6:
0
0
0
0
0
0
Power Level
Info:
Set
Prolific USB-to-Serial Comm Port (COM5)
PniHtUserCfgEN
12
