NaxerTech NTT-101, Operational Manual

Page: 12 / 13

12 | P a g e
Locating & Tracking
Authorized users can interrogate the Tracking Unit to receive locations, street names and details. In addition, they can poll and track their vehicles
through Control Base software or Tracking Web services via Internet browser i.e. Internet Explorer, Firefox or Safari or on GPRS enabled cell
phones.
Vehicle Tracking:
From the Control Base software, over Internet from the Tracking Website or GPRS enabled cell phones, you will able to receive updated GPS
locations any time and display them on a map, and view detailed tracking history, event and communication reports.
From the Control Base or Website, you will able to setup Tracking schedules and view real time movement for unlimited time, in intervals starting
from 10 seconds.
The GPS odometer function can be configured to send travelled distance for each trip (time from ignition on to ignition off) or total distance
travelled.
If no sufficient GSM signal is present, the device can store up to 1000 positions and status alerts until GSM/ GPRS coverage is available. All stored
data will be reported as soon as the device is back online.
You will also be able to configure power saving modes according to ignition off time, or no communication or no movement is detected.
Tips & Warnings:
™
Apply Minimum distance command to prevent the device from draining the battery when the vehicle isn't running. If you are parking the vehicle for
more than two week it is highly recommended to apply power saving commands/ minimum distance command.
™
Make sure your wiring connections are secure. The best type of connections is the crimp on type. They are typically called "butt connectors" and
require a special tool to make the connection properly called a "crimping tool".
™
Use Plastic ties to make tight grip while mounting the device into your vehicle.