NaxerTech NTT-101, Operational Manual, Page: 11 / 13

11 | P a g e
Monitoring Activities
Users will be able to setup and configure monitoring activities and alerts to the Tracking Unit. Using Control Base software or Tracking Web
services via Internet browser i.e. Internet Explorer, Firefox or Safari, or on GPRS enabled cell phones.
Geo ­ Fence Alarms:
The Tracking Unit can be configured with a set of up to four restricted geographic areas (Geo‐Fences), when a Geo‐Fence violation occurs following
activity will be triggered by the Control Base Software:
™ The Tracking Unit will send an alarm message and GPS coordinates to the Control Base. The Control Base software will find the street
name and closest intersection from a map server and send these details through SMS short messages to a list of up to three authorized
contact persons.
Over Speed Alarms:
If the Tracking Unit has been configured with a maximum speed limit, if the vehicle speed exceeds the speed limit following activities will be
triggered by the Control Base Software:
™
The Tracking Unit will send an alarm message and GPS coordinates to the Control Base. The Control Base software will find the street
name and closest intersection from a map server and send these details through SMS short messages to a list of up to three authorized
contact persons.
™
The device will continue collecting data for over speed report until the vehicle speed falls under a specified threshold.
Vehicle Battery Cut Off:
If the Tracking Unit has been removed or cut off from the main power source or if there is any tempering with the main or backup battery, the
following report feature will come into effect:
™
The Tracking Unit will send an alarm message with GPS position to the Control Base.
™ The Control Base software will find the street name and closest intersection from a map server and send these details through SMS short
messages to a list of up to three authorized contact persons.
™
If power is restored back to normal, the device will send another report to the Control Base.
Battery Low Warning:
If the car battery gets too low or, if no main power source is connected and the included battery pack in the Tracking Unit runs low on power:
™
The Tracking Unit will send an alarm message and GPS coordinates to the Control Base. The Control Base software will find the street
name and closest intersection from a map server and send these details through SMS short messages to a list of up to three authorized
contact persons.
™
If the device had been powered off, the device will send another report to the Control Base once power is restored.
Ignition Status Report:
For trip reports and trip distance calculations, the device can be configured to send reports each time the ignition is turned on and off.