12
General Description
Installing Batteries in the Remote Control
External Description
Antenna connection
Installing Batteries
Battery
Cover
Battery
Cover
1. Open the back cover.
2. Insert two AAA size batteries
in the correct polarity. Don’t mix
old or used batteries with new
ones.
3. Close the cover.
Antenna input impedance of this unit is 75 Ohms. VHF/UHF Ohm coaxial cable can be
connected to the antenna jack directly, if the antenna cable is 300 Ohm parallel flat feeder cable,
you need to use the 300 Ohm / 75 Ohm converter to connect the antenna cable to the antenna
jack. For details, please refer to the following drawing:
Antennas with 300 Ohm Flat Twins Leads
Antennas with 75 Ohm Round Leads
Point the remote towards the remote
control sensor of this TV and use it
within 6 meters.
Put the used batteries into the
recycling bin since it can negatively
affect the environment.
Note:
•
One loading of batteries will last for 1 year under normal use.
•
If you do not intend to use the remote control for a long period of time, remove them to avoid
damage due to leakage.
•
Do not use old and new batteries together.
•
The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
