Page 17
Troubleshooting Tip
1.
Missing Channels or Channels not: Found
Channel selection is based on signal strength at the time of an auto-scan. If you are missing a channel
you expect to find, first research the location of broadcast towers in your area. Aiming the antenna in the
direction of the broadcast towers will significantly increase its signal strength.
Always run an auto-scan after changing the antenna's setup.
2.
For best reception:
Place the antenna by a window with a clear view of the sky.
Place the antenna as high as possible.
Aim the antenna in the direction of broadcast towers in your area.
The included antennas have a maximum range of 15 miles. If the
broadcast towers in your area are at a distance greater than 15 miles,
you may require an amplified antenna to obtain reception. The
following websites are great resources for viewing coverage maps:
FCC DTV Map
(Lists signal strength-assuming outdoor antenna):
https://www.fcc.gov/media/engineering/dtvmaps
No Cable.org
(Lists broadcast tower location and distance):
https://nocable.org/
Summary of Contents for NT-1400
Page 1: ...NT 1400...
