background image

PLAYING A NON-BLUETOOTH iPod, MP3 PLAYER, OR OTHER DEVICE 

 

 

1.

  Connect a 3.5mm stereo audio cable from the headphone jack or other audio output on 

your Non-Bluetooth device into the 

AUX INPUT

 on the rear of the 

BS029MS

.

2.

  Adjust the volume control on the connected device to an acceptable level.   

3.

Use the controls of the connected device to control audio playback. 

 

NOTE:

  When a 3.5mm cable is connected, the Bluetooth, CD, and Radio functions will be

automatically disconnected. To resume CD or Radio play, unplug the audio cable from the 

AUX Input on the rear of the device. 

 

LISTEN TO AM/FM STEREO RADIO

 

1.

Press the

 FUNCTION

 Button 

(4) 

repeatedly to select the 

RADIO 

function.

 

2.

Press the 

AM/FM 

Button

 (11)

 to select AM or FM. 

3.

Turn the 

RADIO TUNING KNOB (12) 

to select the desired Radio station.

 

4.

While in Radio Mode, the LCD Display will indicate the current station frequency.

 

 

To view the current time, press the 

DISPLAY 

Button 

(16)

 the time will be shown on 

the LCD display and will disappear automatically.

 

 

NOTE:

  You cannot set the time or the alarm while the Radio is in use.

 

 
ANTENNAS

 

The AM & FM antennas are built-in to the cabinet of this player. To improve reception of radio stations

simply move the entire player to another location until reception improves.

 

SETTING THE CLOCK

 

 

1. Turn the device off before setting the time.

2. To set the clock, press

 

and

 

hold the

 TIME SET

 Button 

(13)

.

3. While holding the

 TIME SET 

Button

 (13)

 press the 

HOUR (14)

 or the 

MINUTE (15)

 buttons

respectively until the correct time is displayed.

Release the 

TIME SET

 Button 

(13)

 when the correct time appears in the LCD display.

 

SETTING THE ALARM

 

 

1.

Turn the device off 

 

before setting the alarm.

2.

Press

 

and

 

hold

 

the

 ALARM

 

SET

 Button 

(17)

 to set the alarm time.

3.

While holding the 

ALARM SET

 Button 

(17)

 press the 

HOUR (14)

 or the 

MINUTE (15)

 buttons

respectively until the proper time is set.

 

4.

Turn

 

on

 

the

 

alarm

 

function

 

by

 

pressing the

 ALARM

 

ON / OFF 

Button 

(19) 

until the Alarm 

icon

 

appears in the LCD Display.

5.

To

 

turn

 

off

 

the

 

alarm,

 

press

 

the

 ALARM ON / OFF 

Button 

(19) 

until the Alarm icon 

disappears from the LCD Display. 

4.

6.

After setting the Alarm to your desired time, press the 

MUSIC / BUZZER

 Button 

(18)

 to the

desired selection.

  If you are waking to CD press the 

MUSIC / BUZZER

 Button 

(18)

 until “

CD

” appears in the

LCD Display.

If you are waking to RADIO press the 

MUSIC / BUZZER

 Button 

(18)

 until “

” appears in the

LCD Display.

If you are waking to BUZZER press the 

MUSIC / BUZZER

 Button 

(18)

 until only the Alarm

icon appears in the LCD Display.

7.

To Stop the Alarm while it is playing, simply press the 

ALARM ON / OFF

 Button 

(19)

 once. 

7

Summary of Contents for NS-441









Reviews: