Naxa NPB-300, User Manual

Page: 5 / 11

- 5 -
Built-in microphone recording
1. Insert cassette as previously described. Press
RECORD(the PLAY button is depressed with it).You
are now recording. If the RECORD button does not
depress, see“PREVENT ACCIDENTAL ERASURE”.
2. Talk normally into the BUILT-IN CONDENSER
MICROPHONE. To obtain optimum recording quality,
place the recorder with the microphone freely exposed
and as close as convenient to the sound source.
3.
NOTE: The automatic level control(ALC)will set the record
level for optimum recordings,regardless of volume setting.
Automatic stop
When your recorder is operating in PLAY or RECORD
mode and the end of the tape is reached, your unit will
automatically shut itself off and return the buttons to the
OFF position.
Stand-up microphone recording
The record with stand-up microphone, plug the microphone
into the
MICROPHONE jack and follow the built-in
microphone recording instructions. When the stand-up
microphone is used,the built-in microphone is automatically
disconnected.
Tape erase
To erase a tape simply record over the unwanted recording.