Naxa NPB-300, User Manual

Page: 2 / 11

- 2 -
Powering the Recorder
Battery installation
1 To remove the battery compartment door(located on the
cabinet bottom)press the snap tab and lift the door off the
cabinet back.
2. Insert 4
〝
R14
〞
(C CELL)-size batteries(not
included)into the battery compartment. Be sure the (+) or
cap end of each battery is installed as show on the battery
diagram.
3. Replace the battery door.
NOTE: If the recorder begins to sound distored, or the tape
reels turn very slowly or not at all, be sure to check with a
new set of batteries or another cassette before seeking
service.
IMPORTANT: Be sure to remove the batteries when storing
the set for more than a few weeks at a time. Leak batteries
can dadly damage the recorder. When discarding batteries,
be sure to dispose of them in the proper manner, according
to provincial and local regulations.
Always push STOP before storing. This will relieve
pressure on certain parts in the recorder that might deform
after long periods of time.