11
attention menu to indicate you turn off Wi-Fi function first, then you can turn on the
mobile network when shows
icon.
1.4 Mobile network settings: Set options for roaming, networks, APNs.
1.4.1 Access Point Names: Choose Settings > Mobile network settings > Access Point
Names, click Access Point Names, then follow the onscreen instructions. (The settings
vary depending on the carrier.)
1.4.2 Data Roaming: If you’re outside your carrier’s network, you may be able to use a
mobile network from another carrier. In settings, choose Mobile network settings and
turn Data Roaming on.
Important: Roaming charges may apply. To avoid data roaming charges, make sure Data
Roaming is turned off.
1.4.3 Network Mode: To change the network operating mode.
1.4.4 Network Operators: To select a network operator.
1.4.5 Keep mobile networks alive: To keep mobile networks alive when system going
to sleep.
1.4.6 Mobile networks status: To display the network, signal strength, roaming status
and etc.
1.5 Ethernet settings: Set up and manage wired Ethernet connection.
2. Sound & Display:
2.1 Media volume: Adjust the media volume level. Adjust it by dragging the volume
bar.
2.2 Notification ringtone: Set the default notification ring.
2.3 Audible selection: Play sound or not when making screen selection.
2.4 SD card notifications: Play sound or not for SD card notifications.
2.5 Orientation: Change the orientations automatically when rotating the device.
2.6 Animation: Play the animation while open or close the window.
2.7 Brightness: Adjust the brightness of the screen. Adjust it by dragging adjusting bar.
2.8 Screen timeout: Adjusting delay before the screen shut down automatically. Six
options are available: 15 seconds, 30 seconds, 1 minute, 2 minutes, 10 minutes and 30
minutes.
[NOTE]: Notification ringtone and SD card notification are only available on the
mobile phone, which is not supported on this device.
3. Security & Location:
3.1 Use wireless networks: Check the position in the application by wireless network
( Wi-Fi or mobile networks).
3.2 Set unlock pattern: To set unlock pattern.
If you set one unlock pattern successfully, the options
Require pattern, Use visible
pattern and Use tactile feedback can be operated. You can set these options as
desired.
3.3 Visible password: Passwords would be displayed while type in.