8
CHARGING
To charge the speaker, follow the steps below:
2. Ensure the red charging indicator light comes on.
3. Charge the speaker until full (4.5 - 5 hours). When battery is full, the indicator light will turn
green.
NOTE:
In order to prolong battery life, please do not charge for more than 8 hours. The built-in
rechargeable battery is not replaceable, do not remove or replace it. Do not throw battery
more energy.
AUX INPUT
The Bluetooth® speaker allows you to enjoy your favorite audio played from external devices
that don’t have Bluetooth® capabilities via the auxiliary input. To use do so, follow these steps:
1. Insert an auxiliary audio cable (not included) into the AUX input on the speaker.
2. Plug the other end of the audio cable into the desired external media device’s AUX input.
3. While in AUX mode, all functions can be controlled via the connected external media device.
NOTE:
When an external media device is connected via the AUX input, the speaker will auto-
device. You can also enter AUX mode by pressing the “MODE” button to cycle through
P
modes.
RECORDING
To make use of the included recording function, follow these steps:
2. Plug in the wired microphone via the MIC IN. Test the microphone to ensure your voice is
audible over the speaker.
3. Press the REC button on the remote control to start/stop recording.
Summary of Contents for NDS-1215
Page 9: ...9 TROUBLESHOOTING...
