1.7 Description of the Rear Cabinet
Connecting the parking br ake line to the parking brake system built in the car
Parking brake
Parking brake switch
(inside the car)
To metallic body or chassis of the car
The Description of the Fixed ISO Female Connector
CONNECTOR A
1.
2.
3.
4. 12V(yellow)
5. Auto Antenna(blue)
6.
7. 12V (To Ignition Key)(red)
8. GROUND(black)
CONNECTOR B
1. Rear Right Speaker (+)
2. Rear Right Speaker (-)
3. Front Right Speaker (+)
4. Front Right Speaker (-)
5. Front Left Speaker (+)
6. Front Left Speaker (-)
7. Rear Left Speaker (+)
8. Rear Left Speaker (-)
Reversal line White
Parking Line GREEN
Fixing Screw Bolt
Fixed ISO Female Connect or
GRAY
GRAY
VIDEO OUT
YELLOW
YELLOW
BLACK
RED R
WHITE L
BLACK
RCA LINE OUT
SUBWOOFER
GREY
GREEN
BT Antenna
Not e:1. P ark ing w ire m ust be connec ted, and the parkin g br ake must be e ngag ed in ord er fo r the monitor t o wo rk
2. Use the c lip en d of the G rou nd wire pr ovid ed by manufacture r to c onne ct M ount ing S crew, us e the othe r
end of the Gro und wire to co nnec t the negative pole of th e power s ourc e. O therwise, the video on screen
may flaches.
Parking brake wires(Green)
6. BLUETOOTH HANDFREE SYSTEM(Option)
1. Pairing and connection
1) Turn on the Bluetooth mode of the mobile phone;
3) For some mobile phones, they can automatically connect with the BT device of the
car audio system after pairing is ok; for some mobile phones, they need to select the
paired BT device and press the CONNECTION button . When connection is ok, the
LCD of the car audio system will show LINK OK.
* when pairing is failed, long press the MODE button on the front panel or PAIR button
on the remote control to enter pairing mode, then the LCD will display PAIR STAR,
then pair and connect with mobile phone again.
*
2.
In the connection status, find the paired and connected Bluetooth Device, then press
the disconnection button to disconnect.
In the disconnection status, find the paired and disconnected Bluetooth Device, then
press the connection button to connect.
3. In the connection status: Mobile phone transfers to the car audio whenever a dialling
takes place; Mobile phone transfers to the car audio whenever receiving a call.
4. Dialling when in connection status
4.1 Dial with the mobile phone directly.
4.2 Dial with remote control with the following procedures:
(1) Short press TEL button, then a line will appear on LCD.
(2) Input telephone number with number buttons 0-9
* Short press CLEAR button to cancel the wrongly input number if necessary
(3) Short press TEL to execute the dialling.
2) Select the item of Finding the BLUETOOTH Device and press enter. Once the device
and unit are paired, the unit will display the name of the device. Select the device and
press enter, and the unit will ask for a password which is 0000. After entering 0000,
press enter and after the pairing is complete the unit will display "Pairing is OK".
In Disc mode, press and hold the PAIR button for 3 seconds to enter Pairing mode.
Using the mobile phone for connecting and disconnecting.
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com
