background image

1.3 Maintenance and Cleaning of Discs

Disc Maintenance

1. To

h

1.

Do not use petrol, thinner, commercial cleaner or anti-static spray used for
plastic LP to wipe disc.

keep the disc clean, andle the disc by its edge, do not touch the disc

surface of the play side.

2. Do not stick paper or tape on the disc. If there is anything on the disc surface,

wipe it up with a soft cloth before using.

3. Do not expose the disc to direct sunlight, or nearby heat sources such as

caliduct, or leave it in a car parked in direct sunlight where there can be a
considerable rise in temperature.

4. Put the disc inside disc case to keep temperature after finishing playback.

Before playing, wipe the disc with a clean cloth. wipe the disc outwards from
the disc center.

2.

Disc Cleaning

Fig.1

Fig.2

Fig.3

A

B

+ side up

1.4 Battery Information of the Remote Control

Replace Battery in the Remote Control

Note about the Battery of the Remote Control

:

1.Before using the remote control for the first time, pull the insulating

sheet out of the remote control as the direction indicated by the
arrow.(see fig.1)

2.Press the movable block hold as the direction indicated by the A arrow

(See fig.2), then pull the battery holder out of the remote control as

the direction indicated by the B arrow(see fig.2).

3.Replace the old battery by a new battery with (+) polarity side upward.

(See fig.3).

4.Insert the battery holder to the original position in remote control.

(See fig.3).

:

1.Lithium battery: CR 2025 3V.
2.Battery Life: 6 months with normal use in normal room temperature.
3.Improper use of battery may cause overheating or explosion, so that

Result in injury or fire .

4.Battery leakage may cause damage to the remote control.
5.Do not short the battery.
6.Do not throw the battery into the fire.
7.To avoid the risk of accident, keep the battery out of reach of children.

8. Specifications

General Specification

Power Supply Requirement..................................................DC 12V
Maximum Power Output...................4 x 25W(measured at DC 14.4 V)

DVD Deck Specification

Format....................................DVD/VCD/JPEG/MP4

/MP3/WMA/CD

Video System....................NTSC/PAL/PAL-M/PAL-N/AUTO(optional)
Audio System..............................................................24 bit/96KHz
Loading System.......................................................... Auto Loading
Mounting Angle.................................................................0 to +/-30

Video

Video Type...................................................................16:9 and 4:3
Video Output level......................................Composite:1.0

0.2Vp-p

Load impedance: 75 ohms

Horizontal Resolution................................................................500

Audio

Audio Output(Analog audio)..........................................2.0

Vrms

Frequency Response.............................20Hz ~ 20KHz(at 1KHz 0 dB)
S/N Ratio(Audio).............................................

90dB

Separation..............................................................................50dB

Radio

FM Section
Frequency range..............................................87.5MHz - 107.9MHz
Usable sensitivity......................................................................3uV
I.F Frequency....................................................................10.7MHz

AM Section
Frequency..........................................................530KHz - 1710KHz

Dimensions(w x h x d)...........................................178 x 50 x 165mm

(AVI,ASF ,WMV,

MPEG-1,MPEG-2,MPEG-4)

Specification

Specification

(at 1KHz 0 dB)

Specification

±

+0

-1.0

PDF created with FinePrint pdfFactory trial version 

http://www.pdffactory.com

Summary of Contents for NCD-694

















Reviews: