08
07
GENERAL
OPERATIONS
MUTE OFF/ON
Select “MUTE on ” mode to
lower
down the speakers output, return to “MUTE OFF”
mode to resume the speakers output.
In Radio mode. Press SEL button for several seconds. LCD will be show from
BEEP ON AREA USA/EUR. At AREA USA/EUR. You can use VOL +/- to select the
AREA frequency.
AREA SETUP
LOCAL RADIO STATION SEARCH
Press SEL button repeatedly to choose LOCAL(DX).Rotate VOL regulator or
press VOL+/- buttons on the RC
to switch between LOCAL and DX.When the
LOCAL function is on the local stations
.
(stations with weak radio)
Press SEL button repeatedly until LOUD ON is displayed.
Rotate VOL regulator
on the front panel or press VOL+/VOL- buttons on the RC to select loudness
ON or OFF.
Press SEL button repeatedly until the display shows STEREO (MONO).Rotate
VOL regulator or press VOL+/- buttons on the RC to switch between STEREO
reception and MONO reception.Improvement of reception of distant stations
can be done by selecting mono mode,which may cut down some reception noise.
GENERAL
OPERATIONS
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display (5).
DISPLAY
Press DISP button (4) to operate as the conversion of each display mode as follow:
- Time is displayed for 5sec when DISP key is pressed, and it returns to its
previous display
unless DISP key is pressed again.
3) From the clock mode, when DISP Key is pressed for longer than 1sec,
clock mode switches to clock
Adjusting mode and the clock display
begins flashing.
At this time clock or minute can be changed by pressing
( +/-)
,
or the ENCODER VOLUME.
RESET
RESET button (6) is placed on the housing and must be activated with either
a ball point pen or thin metal object. (Do not use sharp object to avoid damaging
the unit.) The RESET button (6) is to be activated for the following reasons:
- Initial installation of the unit when all wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
SELECT MODE
By pressing this button(3) to go to different function mode:
- Tuner (radio)
- USB
To access
this mode
a
USB device must be connected.
- Memory Card
To access
this mode
you
must be have
an SD
Card in
serted
.
- AUX input
Mono/Stereo control (in FM radio mode)