09
06
GENERAL
OPERATIONS
GENERAL OPERATIONS
ON/OFF
SOUND ADJUSTMENT
Turn on (2) can adjust the desired volume quality.
Press SEL button (2) will change in the following order.
Option:
VOLUME
Adjust volume level by using
(2)
knob
.
Turn the VOL knob to left to
decrease the sound level, turn the VOL knob to right to increase the sound level.
VOL
/
SEL
Note: The unit is initially set to volume mode.
VOL
BAS
TRE
BAL
FAD
(
Volume
)
(
Bass
)
(
Treble
)
(
Balance
)
(
Fader
)
Press VOL/SEL button shortly and turn VOL button to right or left to select different
menu mode.
Press POWER button (1) to turn on the unit. Press it more than 1 second to turn off.
BASS
Press VOL
/
SEL button(2) one time. Adjust bass level by using
VOL
/
SEL(2)
Knob
.
TREBLE
Press VOL
/
SEL button(2) two times. Adjust treble level by using VOL
/
SEL(2)
Knob
BALANCE
Press VOL
/
SEL button(2) three times. Adjust sound balance between left and
right speakers by using
VOL
/
SEL(2)Knob
.
FADER (optional)
Press SEL button(2) four times. Adjust sound balance between front and rear
speakers by using VOL
/
SEL(2)Knob.
SELECT
MENU
Press VOL/SEL button for several seconds, selecting menu is activated as cyclical
mode of following function for use's selection:
BAS
VOL
TRE
BAL
SUB ON/OFF
DSP OFF
LOUD OFF/ON
STEREO/MONO
DX/LOC
MUTE OFF
FAD
RADIO
OPERATIONS
- Program Scanning
Press AMS(MP3) button (10) shortly to scan preset station.
When the field strength
level is more than the threshold level of stop level, the radio is holding at that preset
number for several seconds with releasing mute, then searches again.
STATION STORING
Press preset button (11~16)
RADIO MODE.
M1 ~ M6
- PRESET MEMORY is loaded when key is pressed for less than 1 second.
- PRESET MEMORY is saved when key is pressed for longer than 1 sec.
AUTOMATICALLY MEMORY STORING
& PROGRAM SCANNING
- Automatically Memory Storing
Press AMS(MP3) button (10) for several
seconds, the radio searches from the
current frequency and checks the signal strength until one cycle search is finished.
And then 6 strongest stations are stored into the corresponding preset number
button.
BAND SELECTION
In
tuner mode, press BAND button (7) to select the desired band. The
reception band will change in the following order:
STATION SELECTION
SCAN
Press scan button (19) to search radio station. When a station signal strength
level
is
more
than
the
level
to
stop
.
The
radio
will
playing
the
station
for
5
seconds
and
the
frequency
blinking
on
the
LCD
at
the
same
time
.
Press
and
hold
scan
button
(19)
more
than
3
seconds
to
select
the
station
which
you
desired
.
The
radio
will
start
play
the
station
.
STATION SELECTION
During radio mode, Press “SEEK
” or “SEEK
”buttons
to
automatically
search a station, Press “SEEK
” or “SEEK
” buttons shortly is operated as
manual turning mode.
more than 1 second