www.naxa.com
Page 7
Using the FM Radio
Your speaker can receive FM radio broadcasts.
To do so, follow these steps:
1. Turn the speaker on.
2. Hold the Mode button to cycle through the modes
(BT/FM/AUX/USB/Memory Card) until you reach FM
mode.
3. To auto scan the stations, press once.
4. Searching all the stations will take a few minutes.
Once all of the stations are scanned, they are stored
into memory automatically.
5. Press - or + to skip through selected stations.
6. Press and hold + to increase the volume, or press
and hold - to decrease the volume.
For better reception, plug the auxiliary input
connector of the included FM cable into
the Aux-In port of the speaker.
When listening to the FM radio:
Tune to a lower preset station
Press
–
Tune to a higher preset station
Press +
Decrease the volume level
Hold
–
Increase the volume level
Hold +
Scan for stations and save them to
preset memory
Press
Switch between BT, FM, AUX, USB,
and Memory Card modes
Hold the Mode button
