Naxa NAS-3060, Instruction Manual

Page: 5 / 14

www.naxa.com Page 5
When the speaker is paired and connected to a device,
the blue LED will light up steadily.
⚠ L
If the speaker fails to pair with your device:
1) Turn the speaker off; 2) Make sure the
device is set to be discoverable; 3) Turn the
speaker on again. The speaker will attempt
to find and pair with your device.
Your speaker can be paired with one device at a
time, only.
Using the Speaker
When the speaker is connected to a Bluetooth
®
device:
To do this... ...do this
Start, pause, or resume
audio playback Press the Control dial ( ).
Skip to the previous track Push the Control dial towards
.
Skip to the next track Push the Control dial towards
.
To do this... ...do this
Decrease the volume level Push and hold the Control dial
towards
.
Increase the volume level Push and hold the Control dial
towards
Answer or end a call
when connected to a
smartphone Press the Control dial ( ).
Change the active source
mode to MP3 Push and hold the Mode dial
towards MP3.
Turn the speaker off Press down and hold the Mode
dial (OFF).
⚠ L
Make sure the volume of your connected
device is set to maximum, then use the
speaker’s controls to adjust the volume to
a comfortable listening level.