Naxa NAS-3060, Instruction Manual

Page: 3 / 14

www.naxa.com Page 3
Connecting Power
Your speaker has an integrated rechargeable battery.
Upon initial use, the battery should be charged fully to
ensure optimal performance and battery life.
Charging Your Speaker
Use the included USB cable to connect the speaker to a
USB power source to charge the battery.
• Connect the small end of the cable to the DC 5V
USB charge port of the unit.(The 3.5mm plug is not)
• Connect the large end of the cable to a high-power
USB port of a computer. The computer should be
powered on.
The status LED will light a steady red when the battery
is charging. When charging is complete, the status LED
will darken.
⚠
⚠
The battery used in this device may present
a fire or chemical burn if mistreated. Do not
disassemble, incinerate, or heat the battery.
Do not leave the battery in a place subject
to direct sunlight, or in a car with its win-
dows closed.
Do not connect the unit to a power source
other than that which is indicated here or on
the label as this may result in the risk of fire
or electric shock.
To turn the speaker on, push the Mode dial (B/Off/
MP3) towards B and hold for 2 seconds. The blue LED
will flash quickly.
To turn the speaker off, press and hold the B/Off/MP3
dial for 2 seconds.
used for power)