Naxa NAS-3059, Instruction Manual

Page: 6 / 14

Page 6 Naxa Electronics
Using the AUX Input
Connector
Connect devices without Bluetooth
®
by using the AUX
connection. The included 3.5mm AUX cable is required
to make this connection.
1. Press to set the active speaker mode to AUX.
2. Use the 3.5mm plug of the included AUX cable to
connect the device’s headphone or line-out jack to
the AUX connector of the speaker.
3. Turn on the device and the speaker. Lower the vol-
ume on both.
4. Set the device volume to 80% of its maximum and
then start playback.
5. Press and hold to gradually increase the volume
of the speaker to a comfortable level.
L L
Use the connected AUX device to control
all functions in AUX mode. The speaker can
only be used to adjust the volume.