Naxa NAS-3059, Instruction Manual

Page: 4 / 14

Page 4 Naxa Electronics
Pairing a Device with
Bluetooth
®
A device must be paired with the speaker before using
them together for the first time.
When you turn on the speaker, it will automatically
search for a paired device. If it does not detect a paired
device, it will switch to Pairing mode (the Status LED
will flash blue quickly). Then:
1. Make sure Bluetooth
®
is enabled on your device.
Enable it if it hasn’t.
2. Press to change the active mode of the speaker
to Bluetooth (a blue LED will start flashing).
3. Use your device to search for available Bluetooth
devices (i.e., your speaker). This function is usually
in the Bluetooth settings menu; refer to your de-
vice’s instruction manual to learn more
4. The speaker will announce itself as “NAXA NAS-
3059.” Select the speaker.
5. If your device asks for a passcode, use “0000” to
complete the pairing process.
The blue LED will flash every few seconds regularly
when the speaker is paired and connected to a device.
L L
Make sure that the volume of your device is
set to its maximum level; use the speaker to
adjust the volume to a comfortable level.
The speaker cannot be paired with more than
one device at a time.
Using the Speaker
When the speaker is connected to a Bluetooth® device:
To do this... ...do this
Start, pause, or resume audio
playback
Press .
Skip to the previous track Press .
Skip to the next track Press .
Decrease the volume level Press and hold
Increase the volume level
Press and hold .