6
CHAPTER 2. GENERALS OF SYSTEM
2.1. Features
The equipment is fully compliant with ITU-R M.540-2, M.476-3, M.625-3, IEC Standard IEC-
61162, IEC-60945 Performance Standard of IMO Resolution MSC.148 (77) Recommendations.
The equipment has 2(two) built-in receiving devices both on English channel (518KHz) and on
Local channel (490KHz/4209.5KHz).
Compact and light design creates the easy installation available.
The operation of power supply prevention circuit makes the input power cut in case of less than
DC 10V or more than DC 36V.
It can indicate the frequency on which any text is being received.
In case of failure in normally receiving, it shows the reason on LCD screen.
In case of power on and performance of its self-diagnosis test, it is possible to automatically
check the status of the equipment inside.
In case of receiving A, B, D, L type messages among the received messages, it is indicated on
LCD screen and a buzzer is activated.
It is available to select Station and message ID received.
It is possible to store more than 200 pieces of data, which is composed of 500 letters long on an
average.
For any received message, it can store for 72 hours.
It is available to select any Station ID for reception refusal and to select any received message
classification ID.
It does not store any message that has more than 33% error rate of received letters, or that fails
to display in a normal way.
2.2. System Composition
Model
Q’ty
Remark
NAVTEX Receiver
SNX-300
1 EA
ANTENNA (Active)
SAN-300/SAN-518
1 EA
ANTENNA CABLE
RG-58C/U
15M
PRINTER
DPU-414
1
Optional
CABLE ASS’Y
1 EA
Installation Material
Instruction Manual
Spare Fuse
AC/DC POWER SUPPLY
SP-300AD
1 EA
Optional
