12
5.1. Station Selection
It is a function to select the transmitting station that can be divided into Automatic mode and
Manual mode. Transmitting station can be automatically selected according to the distance
between the own ship and NAVTEX transmitting station. At the automatic mode, navigation
information from outside of ship should be inputted. At the manual mode, operator can select the
wanted transmitting station. Selection of transmitting station at the manual mode can be done in
selecting respective transmitting station displayed in the Menu.
[1]STATION SELECTION
[ENT]
①
Select the INTERNATIONAL (518KHz) transmitting station in Manual.
②
After moving the direction key and press [ENT] key, the selected station is rejected for
receiving and press [ENT] once more, then receiving for message comes to be possible.
③
When you press SETs (F1) key, all stations will be selected.
④
When you press CLSs (F2) key, all stations will be cleared off.
⑤
When you press EXIT(F4) key after setting up all the functions, it drives to go back to Main
screen.
⑥
LOCAL(490KHz,4.2095MHz) transmitting stations can be selected by manual after choosing
[2]MENUAL SET LOC.
⑦
When you select [3]INITIAL CHANNEL INT, or [4]INITIAL CHANNEL INT, the status of
rejecting the receiving message can be initialized.
SNX-300
[518] [ 490] 10: 06. 02
MAIN MENU LIST >>
[1] STATION SELECTION
[2] MESSAGE SELECTION
[3] MESSAGE HISTORY
[4] USER SETTING
[5] SYSTEM HW SETTING
[6] SYSTEM DIAGNOSTICS
[7] FACT MENUAL
EXIT
In 0
Is 0
Ln 0
Ls 0
SNX-300
[518] [ 490] 10: 06. 02
<<< STATION SELECTION >>>
[1] MENUAL SET INT
[2] MENUAL SET LOC
[3] INITIAL CHANNEL INT
[4] INITIAL CHANNEL LOC
EXIT
In 0
Is 0
Ln 0
Ls 0
[1] MENUAL SET INT
[518] [ 490] 10: 06. 02
CLSs
EXIT
In 0
Is 0
Ln 0
Ls 0
SETs
B1 ID REJECT SETTING
ID :
A
BCDEFGHIJKLMNOPQRSTUVWXYZ
MEM :
A
BCDEFGHIJKLMNOPQRSTUVWXYZ
PRT :
ABCDEFGHIJKLMNOPQRSTUVWXYZ
INS :
ABCDEFGHIJKLMNOPQRSTUVWXYZ
>> This is ID Receiver.
