Navpixel NPD1236-12, User Manual

Page: 30 / 62

Page 30
Uncheck this box will disable multiple-monitor configuration, and all of the touch
panel controllers will be mapped to the primary monitor. The gray shadow area
is the monitor mapped the selected controller/panel. The button
[Mapping] is
used to find the mapping relationships between the monitors and touch panel
controllers. Press the [Mapping] , the software will guide users to touch the
corresponding monitor to obtain the mapping relationship.
After finish monitor mapping, Press [Apply] to apply the mapping relation.
<Split Monitors>
To use the Split Monitor function, users need to select which controller you want
to launch this function, then check the Multiple Monitors box and Split Monitor at
the same time as showing as the follow picture. Press the
[Split Setting] button
to set up the activate area.
It shows the current resolution of display and users can set up the activate area
by inputting the value by yourself or use the default button
[Upper Half] , [Left
Half] or [Quarter] . The default value of panel resolution should be full screen as
Left: 0 , Right: 0 , Top: 0 and Bottom: 0 .
<One Point Calibration>
TouchKit
utility provides a fast tool to identify the touchscreen orientation when
the monitor display was rotated by 90 degrees. Enable this One Point
Calibration feature, Touchtray will pops up this One Point Calibration tool for
users to identify and correct the touchscreen / monitor orientation whenever the
monitors was rotated by 90 degrees. Disable this feature,
Touchtray does not
pop up this One Point Calibration tool. Then, the user has to do four points
calibration to correct the orientation whenever the monitor was rotated.
About
Information about TouchKit .