Page 17
7.
Select the appropriate folder where set-up files will be installed. Then Press
[Next >]
to continue installation.
8.
Then type in the name of program folder for
TouchKit
or press
[Next >]
to
continue. There will be a default name for it.
During driver installation, the setup program will scan COM port for RS232
Touchkit
controller. Once the controller was scanned, the setup program will display a dialog
as
Click Yes to add the controller on the specified COM port automatically.
9.
Windows is copying files to disk and the setup is complete. It will request re-boot
computer. Press
[Yes >]
to re-boot immediately or
[No >]
to re-boot later. The
installation will not be finished until system re-boot.
Summary of Contents for NPD1236-12
