12
Operation
Setting Time and Date
1. Press button
C
3x to enter the time setting mode. The
seconds start flashing on the display.
2. Press button
B
to reset the seconds to zero.
3. Press button
D
. The minute digit flashes. Press the
button
B
to set the minutes.
4. Press button
D
, the hour digit flashes. Press the
button
B
to set the hours.
If you press and hold the button
B
, the hour digit runs
in a cycle starting in the 12 hour mode from 0 – 12
AM to 1 – 11 PM and then from 0 – 23 in the 24 hour
mode. During setup
A
and
P
indicate the 12 hour
display mode.
H
appears to indicate the 24 hour dis-
play mode.
If you have selected the 12 hour display mode, the
small display (3) shows
PM
to indicate the p.m. hours.
5. Press button
D
again. The day digit starts to flash.
Press the button
B
to set the desired date.
6. Enter the month digit by pressing button
D
once
more. Use the button
B
to set the month.
7. Press button
D
once more to setup the day of the
week display. Set the day of the week with button
B
.
8. Press button
C
to confirm your settings and return to
the normal display mode.
