
X300
1-20
NAVMAN
5.1.5 Altitude mode
This mode shows total accumulated altitude and the current
altitude.
Access this mode
If necessary, press to turn the power on and start normal
operation. Press repeatedly until the screen appears as
shown above.
While in Altitude mode
• Press to store current lap data (the screen briefly shows the
lap distance, lap number, and lap time that is being stored).
• Press and hold
to clear accumulated altitude only.
• Press to go to the next mode.
Note: The Navman X300 displays altitude in units corresponding to
speed units (see section 4.1.5).
5.1.6 Zone mode
When Zone is OFF, the Zone (MIN) and Zone (MAX) options are
skipped and zone alerts do not sound.
Access this mode
If necessary, press to turn the power on and start normal
operation. Press repeatedly until the screen appears as
shown above.
To set Zone status
1) Press
to start editing (zone status flashes).
2) Press or to select ON or OFF.
3) Press
to stop editing.
4) Press to go to the next mode.
m
m
X300 - Normal operation
accumulated altitude current altitude
status
ZONE
SET