
X300
1-14
NAVMAN
4.1.4 Beep
Set beep ON or beep OFF. When beep is ON, an audible ‘beep’
will sound when buttons are pressed.
Access this option
If necessary, press and hold to turn the power on and enter
setup. Press repeatedly until the screen appears as shown
above.
To set button beep status
1) Press
to start editing (setting status flashes).
2) Press or to select On or OFF.
3) Press
to stop editing.
4) Press to go to the next option, or hold to leave setup.
4.1.5 Set speed units
Set units for speed (km/h or mph).
Access this option
If necessary, press and hold to turn the power on and enter
setup. Press repeatedly until the screen appears as shown
above.
To set speed units
1) Press
to start editing (speed units flash).
2) Press or to select km/h or mph.
3) Press
to stop editing.
4) Press to go to the next option, or hold to leave setup.
Note: Distance and altitude are displayed in units that correspond
to user selected speed units. For example, if you select speed units
‘km/h’, then distance is displayed in ‘km’ and altitude in ‘m’.
X300 - Setup
speed units
status
SYSTEM
SET
SYSTEM
SET
km
m
km/h