19
Tracker500/500i User Manual
10.0 GoTo
The GoTo function provides a simple method of navigating from the current boat position
to a waypoint or mark.
The GoTo sub-screen that can be selected from the Main
Selection screen gives the options to GoTo a waypoint or
mark, or to Go Along a route. Each of these options will
bring up the appropriate list of destinations. Selecting a
destination will start the navigation process and switch to
the Highway screen. The Tracker500/500i will display the
distance, time and bearing to the destination waypoint. It
can also guide a NMEA compatible autopilot to the
destination waypoint.
There are several other methods of activating the GoTo
function:
• From the Trackplot screen, position the cursor over a waypoint or mark. Press and hold
the zoom-out key until the waypoint or mark details are displayed. Select the GoTo
option from this screen.
zoom-out
zoom-in
mark
ctr
mob
on
• From the Waypoints or Marks sub-screens, select your destination. A waypoint or mark
details screen will be displayed. Select the GoTo option from this screen.
• From the Routes sub-screen, select the route you want to traverse. Then select the Go
Along option.
Cancel GoTo
To deactivate the GoTo function simply select STOP NAV from the Main Selection page. A
message will be displayed asking you for confirmation that you wish to stop navigating to
the current waypoint.
